 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Jumbo-LED 16.11.2007 Radiation Blue Type 3W Technology InGaN/Al2O3 ELJ-460-617 rev. 04 Case Plastic lens, metal case Description High-power blue LED in an aluminium case with thread socket, for easy handling and heat sink mounting O12,5 O16 O11 O1,7 5,08 4,5 1,5 Outline: H = 12.4 mm ( 0.5) 2 Applications Illumination, sensors and optical communications, medical appliances, measurement systems 7,9 D = 16 mm ( 0.5) Thread M10 1 2 13 8 Pin 1 - cathode Pin 2 - anode M10 Absolute Maximum Ratings at Tamb = 25C, on heat sink (S 200 cm), unless otherwise specified Parameter DC forward current Peak forward current Power dissipation Operating temperature range Storage temperature range Junction temperature Test onditions on heat sink tp10 s, f500 Hz on heat sink on heat sink on heat sink on heat sink Symbol IF IFM P Tamb Tstg Tj Value 0.7 1.0 2,8 -25 to +100 -25 to +100 100 Unit A A W C C C Electrical Characteristics Tamb = 25C, unless otherwise specified Parameter Forward voltage Forward voltage* Switching time Reverse voltage Test conditions IF = 350 mA IF = 700 mA IF = 350 mA IR = 10 A Symbol VF VF tr , t f VR RthJC 5 10 K/W Min Typ 3.2 3.6 20/30 Max 3.9 Unit V V ns Thermal resistance junction-case *only recommended on optimal heat sink We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 1 of 5 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Jumbo-LED 16.11.2007 ELJ-460-617 rev. 04 Optical Characteristics at Tamb = 25C, on heat sink (S 200 cm), unless otherwise specified Test Symbol Min Parameter conditions Radiant power Radiant power* Radiant intensity Radiant intensity* Luminous intensity Luminous intensity* Peak wavelength Dominant wavelength* Spectral bandwidth at 50% Viewing angle IF = 350 mA IF = 700 mA IF = 350 mA IF = 700 mA IF = 350 mA IF = 700 mA IF = 350 mA IF = 350 mA IF = 350 mA IF = 100 mA e e e e v v p p 0.5 450 48 800 55 Typ 70 110 1020 1650 67 107 460 465 27 13 470 Max Unit mW mW mW/sr mW/sr cd cd nm nm nm deg *only recommended on optimal heat sink Note: All measurements carried out with EPIGAP equipment, on blank aluminium heat sink, S = 180 cm, passive cooling. Measurement results and curve characteristics obtained with other heat sinks may differ. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 2 of 5 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Jumbo-LED 16.11.2007 ELJ-460-617 rev. 04 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 3 of 5 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Jumbo-LED 16.11.2007 ELJ-460-617 rev. 04 Remarks concerning optical radiation safety* For low forward current (<100 mA) and continuous operation, this LED may be classified as LED product Class 2 , according to standard IEC 60825-1:A2. Class 2 products emit in the visible region, damaging exposure is usually prevented through avert reactions including blink reflex. It can be expected that these reactions provide sufficient protection under reasonably predictable conditions. This also implicates a direct observation of the light beam by means of optical instruments. If intended to operate at higher current (up to max. DC current), this product should be classified as LED product Class 2M , according to standard IEC 60825-1:A2. Class 2M products are safe to eyes and skin under normal conditions, including when users view the light beam directly. These products emit in the visible region and it is presumed that the human blink reflex will be sufficient to prevent damaging exposure, but if the beam is focused down, damaging levels of radiation may be reached. Therefore, users should not incorporate optics that could concentrate the output into the eyes. *Note: Safety classification of an optical component mainly depends on the intended application and the way the component is being used. Furthermore, all statements made to classification are based on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed current or altering the light beam with additional optics may lead to different safety classifications. Therefore these remarks should be taken as recommendation and guideline only. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 4 of 5 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 Jumbo-LED 16.11.2007 ELJ-460-617 rev. 04 Handling precautions To prevent damage to the LED during soldering and assembly, following precautions have to be taken into account. a) The bending point of the lead frame should be located at least 2.5 mm away from the body. b) While bending, the base of the lead frame has to be fixed with radio pliers or similar. c) To ensure an adequate strain relief, the lead frames have to be firmly fixed during soldering. d) Avoid any torsion or tensile loading of the lead frames, especially when they have been heated after being soldered. e) LEDs are static sensitive devices, so adequate handling precautions have to be taken, e.g. wearing grounding wrist straps. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 5 of 5 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 |
Price & Availability of ELJ-460-617
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |